Remix education
Daily Pharma QuizpharmacyTopic wise MCQs

Industrial pharmacy–I (BP605TP) (Part:- 4) MCQs with Answers

Industrial pharmacy–I (BP605TP) (Part:- 4) MCQs with Answers

151. The thickness of Tablets are measured by
(A) Sliding caliper scale
(B) Microscopic technique
(C) Rotating disc technique
(D) Technicon Auto analyser

152. The mesh size of USP disintegrator is
(A) 10
(B) 5-6
(C) 28-32
(D) 2.5

153. Enteric coated tablets are initially tested for disintegration is
(A) Simulated gastric fluid
(B) Simulated intestinal fluid
(C) Purified Water
(D) Phosphate Buffer (pH-7.4)

154. Cam track are used in tablets for
(A) Feeding the granules
(B) Fixing the Shape
(C) Compressing the granules
(D) Building the movement of punches

155. Capping of Tablets can be eliminated by
(A) Pre-compression
(B) Reducing the final compression rate
(C) Using flat punches
(D) All of the above

156. Maillard’s reaction is related to
(A) Diluent
(B) Binder
(C) Disintegrants
(D) Lubricants

157. Aspartame has the main disadvantage as
(A) Carcinogenic
(B) Bitter after taste
(C) Less sweeter than sucrose
(D) Hygroscopic in nature

158. Enteric coating materials are insoluble in gastric media (ph upto 4)being
(A) Acid esters
(B) Esters
(C) Presence of COOH group
(D) None of above

159.This tablet is designed to pass unchanged through the stomach to the intestine.
(A) Sugar coated tablets
(B) Enteric coated tablets
(C) Gelatin coated
(D) None of above

160. Diclofenac tablet coated with CAP has been administered to a patient, where do you expect the drug to be released?
(A) Stomach
(B) Oral cavity
(C) Small intestine
(D) Liver

161. A polymer used to form a hydrophilic matrix of Tablet is………….
(A) HPMC
(B) CAP
(C) EC
(D) PE

162. The measurement of cohesive strength of Gelatin molecules that proportional to its molecular weight
of Gelatin is called………….
(A) Bloom strength
(B) Viscosity
(C) Surface Tension
(D) Partition co efficient

163. Choose the right sentence.
(A) Picking means tablet material adhered to the wall of die cavity.
(B) Sticking means tablet material adhered to the wall of die cavity.
(C) Sticking means small amount of tablet powder adhered to punch face after compression.
(D) Sticking means particles stick to each other and forms a segregated mass.

164. According to USP rotating basket dissolution apparatus is……………..
(A) Apparatus I
(B) Apparatus II
(C) Apparatus III
(D) Apparatus IV

165. To avoid pre-systemic metabolism, we should formulate……………
(A) Enteric coated tablets
(B) Sublingual tablets/ buccal tablets
(C) Effervescent Tablets
(D) Floating Tablets

166. TiO2 is used as……………
(A) Preservative for capsule
(B) Plasticizer in capsule
(C) Lubricant for tablet
(D) Opacifier for Gelatin

167. The ingredients mentioned below are commonly used as the coating agents for film coating except…
(A) Cellulose acetate phthalate

(B) Carnauba wax
(C) Hydroxy ethyl cellulose
(D) Sodium carboxy methyl cellulose

168. In a cosmetic preparation an antioxidant used in an aqueous system is……………
(A) Sodium formaldehyde sulphoxylate
(B) Tocopherol
(C) Methyl Paraben
(D) Phenol

169. Type A Gelatin is………
(A) Acid treated
(B) Base treated
(C) Salt treated
(D) None of above

170. Type B Gelatin is……………
(A) Acid treated
(B) Base treated
(C) Salt treated
(D) None of above

171. During Hard Gelatin Capsule manufacturing spinning is carried out for…………..
(A) Dry the Gelatin mass
(B) Create good cross linked mass
(C) Uniformly distribute the Gelatin mass
(D) To improve shining

172. It is the example of Anionic detergent of shampoo…………
(A) Benzalkonium chloride
(B) Cetyl trimethyl ammonium chloride
(C) Sodium lauryl sulphate
(D) Betains

173. As per USFDA the concentration of Fluoride ions in dentifrices is…………
(A) 1 ppm
(B) 10 ppm
(C) 100 ppm
(D) 1000 ppm

174. It is the substance used as film former in Nail lacquers.
(A) PEG
(B) Nitro cellulose
(C) Glycerol
(D) HPMC

175. For preparation of Nail lacquer the solvent used should have………….
(A) Fastest possible drying rate for rapid effect
(B) Controlled drying to prevent skinning and bubbling
(C) Slowest possible drying rate
(D) Drying of solvent is least important in formulation process

176. Packaging of pharmaceutical product will…….
(A) Protect the drug from light and other environmental factors

(B) Helps in identifying the drug products
(C) Protect from damage occurring during the transportation
(D) All of above

177. It is also called as surface treated soda lime glass.
(A) USP type I
(B) USP type II
(C) USP type III
(D) USP type IV

178. The following type of Glass is used for packaging of food products
(A) USP type I
(B) USP type II
(C) USP type III
(D) USP NP type

179. The following type of Glass is used for packaging of topical products
(A) USP type I
(B) USP type II
(C) USP type III
(D) USP NP type

180. If the product containing high amount of alcohol, ethers or organic acids then we should avoid use of………………….. For packaging of these products.
(A) Metal
(B) Glass
(C) Plastic

(D) Any of the above can be used

181. The following image is for………….
(A) Threaded screw type of closure
(B) Lug cap type closure
(C) Crown Cap closure
(D) Pilfer proof closure

screenshot 2021 04 23 18 59 51 105 com8618461030359739302 Industrial pharmacy–I (BP605TP) (Part:- 4) MCQs with Answers

182. The following image is for………….
(A) Threaded screw type of closure
(B) Lug cap type closure
(C) Crown Cap closure
(D) Pilfer proof closure

screenshot 2021 04 23 19 00 57 206 com4177544308278897624 Industrial pharmacy–I (BP605TP) (Part:- 4) MCQs with Answers

183. The limit of ml of consumption of 0.02 N acids in powder glass test for USP type I glass is…….
(A) 1.0 ml
(B) 0.7 ml
(C) 8.5 ml

(D) 15 ml

184. The limit of ml of consumption of 0.02 N acids in powder glass test for USP type III glass is…….
(A) 1.0 ml
(B) 0.7 ml
(C) 8.5 ml
(D) 15 ml

185. The limit of ml of consumption of 0.02 N acids in powder glass test for USP type NP glass is…….
(A) 1.0 ml
(B) 0.7 ml
(C) 8.5 ml
(D) 15 ml

186. The limit of ml of consumption of 0.02 N acids in water attack test for USP type II (Size <100ml) glass is…….
(A) 1.0 ml
(B) 0.7 ml
(C) 8.5 ml
(D) 15 ml

187. According to USP the tablet containing 130 mg average weight passes the weight variation test if, % Difference is……………..
(A) 10
(B) 7.5
(C) 5
(D) 3

188. Milling of Drug and excipients  mixing if Milled powder  Compression to slug  screening of Slug  Mixing with Lubricants and Disintegrants  Compression. These are the steps employed for……..
(A) Wet binding
(B) Dry binding
(C) Direct compression
(D) None of above

189. Sodium starch glycolate is not used as a disintegrant if we want to formulate……………
(A) Sustain release tablet
(B) Immediate release tablet
(C) Tablet having rapid onset of action
(D) All of above

190. Non uniform distribution of colour on the tablet surface is known as;
(A) Mottling
(B) Picking
(C) Blistering effect
(D) Capping

191. Generally the tablets are not accepted, if the friability of that tablets loses their weight;
(A) Less than 0.5%
(B) Less than 0.75%
(C) Less than 1.5%
(D) Less than 0.5-1.0%

192. Granule density can be determined by using one of the following.
(A) Micrometer
(B) Toluene distillation method

(C) Pycnometer
(D) Coulter-counter method

193. The only artificial sweetener available is;
(A) Honey
(B) Molasses
(C) Saccharin
(D) All of above

194. The artificial sweetner is about 500 times sweeter than sucrose and has a bitter after taste is;
(A) Mannitol
(B) Aspartame
(C) Saccharin
(D) Sorbitol

195. Fluidized bed dryer is well adopted in the pharmaceutical industry for the drying of;
(A) Powder before filling of capsules
(B) Granules before compression into tablets
(C) Empty capsules before filling
(D) Powders before mixing and granulation

196. Which one of the following device is used to increase the efficiency of drug delivery via aerosol?
(A) Tube spacers
(B) Actuator
(C) Metered valve
(D) Pressure valve

197. In Aerosol devices, one of the following used to ensure that the aerosol product delivered in the proper and desired form is,
(A) Gasket
(B) Actuator or button
(C) Stem

(D) Valve

198. For aerosol dispersion, the surfactant added having the HLB Value;
(A) Less than 10
(B) More than 10
(C) Less than 5
(D) More than 20

199. In case of Aerosol formulation, for the filling of aerosol products- the cold filling method required the chilling of all the components, including concentrate and propellant ,to a temperature of;
(A) 30 to 40˚F
(B) 30 to 40˚C
(C) -30 to -40˚F
(D) -30 to -40˚C

200. For the filling of aerosol products,-the pressure filling method requires the chilling of all the components, including concentrate and propellant, to a temperature of,
(A) Room temperature
(B) Refrigerator temp.
(C) -30 to -40˚C
(D) -30 to -40˚F

201. Hermetically sealed container
(A) Protect loss of product during handling
(B) Is Impervious to air
(C) Is Light resistant
(D) Prevent loss of product from effectiveness

202. Hermetic container are used for;
(A) Oral solution
(B) Powder
(C) Injectable
(D) None

203. Flaking is a problem associated with container made of:
(A) Soda lime glass
(B) Borosilicate glass
(C) Neutral glass
(D) None

204. Soda lime glass not suitable for parenteral solution because.
(A) Mechanically weak
(B) Release Alkali
(C) Losses brilliancy
(D) None

205. Which ingredient is added in borosilicate glass to impart chemical stability and heat resistance?
(A) Boron
(B) Boric oxide
(C) Cal-oxide
(D) Barium oxide

206. Ampoules is usually made up of;
(A) Neutral Glass
(B) Borosilicate Glass
(C) Soda glass
(D) Silicone treated glass

Remix education

207. Ferrous or manganese oxide is added during the manufacture of glass container to make
(A) Alkali resistant
(B) Eory mould able
(C) Colored glass
(D) None

208. Plastic container is not suitable because
(A) Permeable to gases

(B) Additives leach out from plastic
(C) Adsorb ingredient from product
(D) All of above

209. Which one is thermosetting plastic?
(A) Poly chlorides
(B) PVC
(C) Phenol formaldehyde
(D) Polystyrene

210. Which one of this material is commonly used for closures?
(A) Rubber
(B) Metal
(C) Glass
(D) Plastic

211.Which one is used as vulcanizing agent in rubber?
(A) Zno
(B) S
(C) Caco3
(D) Znso4

212. Glass container should comply with the
(A) Leakage test
(B) Hydrolytic resistance
(C) Mechanical strength
(D) None

213. Hydrolytic resistance test is for
(A) Mechanical Strength

(B) Liberation Alkali
(C) Loss of brilliancy
(D) None

Other Part Links

➡️ Industrial pharmacy MCQs with Answers :- Click here

➡️ Industrial pharmacy:- 1 MCQs with Answers :- Click here

➡️ INDUSTRIAL PHARMACY–I (BP605TP) MCQs with Answers :- Click here

➡️ Industrial pharmacy–I (BP605TP) (Part:- 2) MCQs with Answers :- Click here

➡️ Industrial pharmacy–I (BP605TP) (Part:- 3) MCQs with Answers :- Click here

➡️ Industrial pharmacy–I (BP605TP) (Part:- 4) MCQs with Answers :- Click here

Remix education

Subject:- Industrial pharmacy MCQs

Semester:- 6th sem , sem 6